Daily cleaning and maintenance of kitchen faucets

After a certain period of time, the faucet will produce a lot of stains, which will have a great impact on the appearance of the faucet, and if the maintenance of the faucet is not emphasized, it will also affect the normal use of the faucet. Let Xiao Bian introduce the precautions for cleaning and maintenance of Kitchen Faucets today.Product display is to use a good bubbler to inject air into the water to prevent falling water and maintain the flushing effect. At the same time, it can also slow down the water flow rate and reduce the water flow to achieve the purpose of water saving. The other is the "pointed" design of the handle. When the handle is raised to a certain height, there is a noticeable pause, reminding that the amount of water used has increased.

The cleaning and maintenance precautions for kitchen faucets include the following three points:

First, lightly open off

Don't use too much force on the switch tap, just gently turn it. The metal hose of the shower head should be kept in a natural stretch. Do not fold it into a dead end to prevent it from breaking.

Second, regular cleaning

Even high-quality faucet products have to rely on proper cleaning and maintenance to reach their maximum capabilities. The correct method is to use a neutral cleaning solution with a soft cloth, avoid using alcoholic ingredients and acidic cleaners when cleaning, because they will damage the surface of the faucet.

Third, develop good cleaning and maintenance habits

1, because the water contains trace amounts of carbonic acid, easy to form a scale on the metal surface of the faucet surface corrosion, so often with a soft cotton cloth or sponge with a neutral soap water wipe the faucet surface, and then dry the surface with a soft cloth. And clean the outlet configuration screen to clean the impurities and scale in the screen.

2. After bathing, it is best to clean the water droplets inside the shower, and then hang it up. Do not put the shower directly on the switch to form scale. If there is a buildup of scale, use a pencil or chopstick to gently scrape it off and wipe it off with a rag.

3, scales on the tap, water rust, etc., just wipe the surface with a damp cloth or sponge with a special cleaning agent, then wipe with a clean rag or rinse with water. Use a soft toothbrush to remove the toothpaste or use a scouring pad to wipe the toothpaste gently to remove scale and oil, leaving the surface of the faucet clean and shiny.

4, many people will only pay attention to the surface of the faucet when cleaning the faucet, but in fact the interior of the faucet is more important. If the faucet has a reduced amount of water or a water fork, it is most likely due to a clogged bubbler. The bubbler can be removed and soaked in vinegar. Use a small brush or other tool to clean the debris and reinstall it.

There are many reasons why a faucet leaks. If you simply leak it, you can repair it yourself. If the outlet is leaking, it is caused by the wear of the shaft washer. Just use the pliers to loosen and remove the cap and replace it with a new shaft washer. If the gap in the lower part of the faucet is leaking, it is caused by the wear of the triangular gasket in the gland. Remove the gland inside the gland and replace it with a new one.

<\p><\div>