Daily cleaning and maintenance of kitchen faucets

After a certain period of time, the faucet will produce a lot of stains, which will greatly reduce the aesthetics of the faucet. In addition, if you do not pay attention to the maintenance of the faucet, it will affect the normal use of the faucet. Let's introduce the precautions for cleaning and maintenance of Kitchen Faucets.

The cleaning and maintenance precautions for kitchen faucets include the following three points:

First, lightly open off

Don't use too much force on the switch tap, just gently turn it. The metal hose of the shower head should be kept in a natural stretch. Do not fold it into a dead end to prevent it from breaking.

Second, regular cleaning

Even high-quality faucet products have to rely on proper cleaning and maintenance to reach their maximum capabilities. The correct method is to use a neutral cleaning solution with a soft cloth, avoid using alcoholic ingredients and acidic cleaners when cleaning, because they will damage the surface of the faucet.

Third, develop good cleaning and maintenance habits

1, because the water contains trace amounts of carbonic acid, it is easy to form scale on the metal surface to have a corrosive effect on the faucet surface, so often use a soft cotton cloth or sponge with neutral soap water to wipe the faucet surface, and then dry the surface with a soft cloth. And clean the outlet configuration screen to clean the impurities and scale in the screen.

2. After bathing, it is best to clean the water droplets inside the shower, and then hang it up. Do not put the shower directly on the switch to form scale. If there is a buildup of scale, use a pencil or chopstick to gently scrape it off and wipe it off with a rag.

3, scales on the tap, water rust, etc., just wipe the surface with a damp cloth or sponge with a special cleaning agent, then wipe with a clean rag or rinse with water. Use a soft toothbrush to remove the toothpaste or use a scouring pad to wipe the toothpaste gently to remove scale and oil, leaving the surface of the faucet clean and shiny.

4. Many people only pay attention to the surface of the faucet when cleaning the faucet, but in fact, the interior of the faucet is more important. If the amount of tap water is reduced or the water fork is produced, it may be due to a clogged bubbler. The bubbler can be removed and soaked in vinegar. Use a small brush or other tool to clean the debris and reinstall it.

Leaking taps can be caused by many reasons. If it is a simple leak, you can repair it yourself. If water leaks at the water outlet, it is caused by the wear of the shaft washer. Just use the pliers to loosen and remove the cap and replace it with a new shaft washer. If the gap in the lower part of the faucet is leaking, it is caused by the wear of the triangular gasket in the gland. Remove the gland inside the gland and replace it with a new one.